אַלע קאַטעגאָריעס

פּראָדוקטן

היים>פּראָדוקטן>פלאָר פּלאַסטיק ליינד פּאָמפּע

https://www.neworld-cn.com/upload/product/1620456134950732.jpg
ימד מאַגנעטיק סענטריפוגאַל פּאָמפּע

ימד מאַגנעטיק סענטריפוגאַל פּאָמפּע


● IMD Magnetic Centrifugal Pump
● Magnetic drive Pump
● סעאַללעסס פּאָמפּע

Email: [אימעיל באשיצט]

די הויפּט טעכניש דאַטאַ

● Flow rate: 1~160 m3/h; 4.4-704GPM
● Total delivery head: 17~62m; 17-203feet
● Temperature range: -20 °C to 100 °C (-4°F to 212 °F)

אַפּפּליקאַטיאָנס

● Corrosive, pure and contaminated media in chemical industries,
● Pharmaceutic and petrochemical industries,
● In metal processing, waste water treatment etc.  
● When Stainless steel is not sufficiently resistant
● An alternative for expensive haste alloy, titanium alloy pumps
● When anti-adhesive surfaces are important.
- Strong corrosive liquids
- Aggressive, explosive and toxic liquids
- Volatile chemicals
- Flammable liquids
- Difficult-to-seal liquids

קאַמפּעטיטיוו אַדוואַנטידזש

● Economic and Reliable Design Feature
- סעאַלעסס פּלאַן און פריי ליקאַדזש
אָן שטיל פּלאָמבע און דרייווינג דורך מאַגנעטיק קאַפּלינג, וואָס ויסמיידן ליקאַדזש.
-קאָמפּאַקט סטרוקטור
נאָענט-קאַפּאַלד פּלאַן, מאַגנעטיק קאַפּלינג פאַרבינדן צו די מאָטאָר שטיל סוף גלייַך, אָן ראָולינג שייַכעס אָנווער. הויך עפעקטיווקייַט און נידעריק ראַש. רעדוצירן ייַנמאָנטירונג פּלאַץ און לייכט פֿאַרזאַמלונג.
-באַקוועם וישאַלט
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,
-קיין מאַגנעטיק עדי קראַנט באַהיצונג
ספּייסער אַרבל געמאכט פון קאַרבאָן-פיברע-ריינפאָרסט פּלאַסטיק [CFRP], מיט הויך-שטאַרקייַט מאַקאַניקאַל פאַרמאָג, פריי פון די מאַגנעטיק עדי קראַנט דערשיינונג. דורכקוק און וישאַלט אַרבעט.

The Pump Housing

● Virgin Fluoroplastic  
- Considerably easier and more reliable quality control
- No reduction in the permeation resistance.
- Pure pharmaceutical and fine chemical media: no contamination
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP]
-The metal-free system does not induce any eddy currents and thus avoids unnecessary heat generation. Efficiency and operational reliability benefit from this. Even low flow rates or media near their boiling point can therefore be conveyed without the introduction of heat.
● Closed Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
● Bearing
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-Dimensional stability. SSIC is extremely resistant to corrosion and abrasion

INQUIRY