sadaya Kategori

produk

Imah>produk>Pompa Plastik dijejeran Fluor

https://www.neworld-cn.com/upload/product/1620456134950732.jpg
Pompa sentrifugal magnét IMD

Pompa sentrifugal magnét IMD


● IMD Magnetic Centrifugal Pump
● Magnetic drive Pump
● Pompa tanpa sehel

surélék: [email dijaga]

Data Téknis Utama

● Flow rate: 1~160 m3/h; 4.4-704GPM
● Total delivery head: 17~62m; 17-203feet
● Temperature range: -20 °C to 100 °C (-4°F to 212 °F)

aplikasi

● Corrosive, pure and contaminated media in chemical industries,
● Pharmaceutic and petrochemical industries,
● In metal processing, waste water treatment etc.  
● When Stainless steel is not sufficiently resistant
● An alternative for expensive haste alloy, titanium alloy pumps
● When anti-adhesive surfaces are important.
- Strong corrosive liquids
- Aggressive, explosive and toxic liquids
- Volatile chemicals
- Flammable liquids
- Difficult-to-seal liquids

Kauntungan kalapa

● Economic and Reliable Design Feature
-Sealess design and free leakage
Without shaft seal and driving through by magnetic coupling, which avoid leakage.
-Struktur Kompak
Close-coupled design, magnetic coupling connect to motor shaft end directly, without rolling bearing loss. High efficiency and low noise. Reduce installation space and easily assembly.
-Convenient maintenance
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,
-No magnetic eddy current heating
Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP],With high-strength mechanical property, free from the magnetic eddy current phenomenon.Inspection and maintenance work.

Perumahan Pompa

● Fluoroplastik Parawan  
- Kontrol kualitas langkung gampang sareng langkung dipercaya
- No reduction in the permeation resistance.
- Farmasi murni sareng média kimia murni: henteu aya kontaminasi
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Spacer leungeun baju tina plastik Karét-serat-bertulang [CFRP]
-Sistem bébas logam henteu nyababkeun arus anu eddy sahingga ngahindaran generasi panas anu teu perlu. Efisiensi sareng reliabilitas operasional nguntungkeun tina ieu. Bahkan tingkat aliran rendah atanapi média caket titik golakna na tiasa ditepikeun tanpa aya panasna.
● Closed Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
● Bantalan
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-Dimensional stability. SSIC is extremely resistant to corrosion and abrasion

panalungtikan