Të gjitha kategoritë

Produkte

home>Produkte>Pompë me rreshtim plastik fluori

https://www.neworld-cn.com/upload/product/1620456134950732.jpg
Pompë centrifugale magnetike IMD

Pompë centrifugale magnetike IMD


● IMD Magnetic Centrifugal Pump
● Magnetic drive Pump
. Pompë pa vulë

Email: [email mbrojtur]

Të dhënat kryesore teknike

● Flow rate: 1~160 m3/h; 4.4-704GPM
● Total delivery head: 17~62m; 17-203feet
● Gama e temperaturës: -20 °C deri në 100 °C (-4 °F deri në 212 °F)

Aplikime

● Corrosive, pure and contaminated media in chemical industries,
● Pharmaceutic and petrochemical industries,
● In metal processing, waste water treatment etc.  
● When Stainless steel is not sufficiently resistant
● An alternative for expensive haste alloy, titanium alloy pumps
● When anti-adhesive surfaces are important.
- Strong corrosive liquids
- Aggressive, explosive and toxic liquids
- Volatile chemicals
- Flammable liquids
- Difficult-to-seal liquids

Përparësia konkurruese

● Economic and Reliable Design Feature
-Dizajn pa det dhe rrjedhje falas
Pa vulë boshti dhe lëvizje përmes bashkimit magnetik, i cili shmang rrjedhjet.
-Struktura kompakte
Dizajni i bashkuar nga afër, bashkimi magnetik lidhen drejtpërdrejt me fundin e boshtit motorik, pa humbje të mbajtjes së rrotullimit. Efikasitet i lartë dhe zhurmë e ulët. Ulni hapësirën e instalimit dhe montoni me lehtësi.
-Mirëmbajtje e përshtatshme
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,
-Nuk ka ngrohje magnetike të rrymës
Mëngë hapësinore e bërë nga plastika e përforcuar me fibra karboni [CFRP], Me veti mekanike me rezistencë të lartë, e lirë nga dukuria e rrymës magnetike.

The Pump Housing

● Virgin Fluoroplastic  
- Considerably easier and more reliable quality control
- No reduction in the permeation resistance.
- Pure pharmaceutical and fine chemical media: no contamination
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP]
-The metal-free system does not induce any eddy currents and thus avoids unnecessary heat generation. Efficiency and operational reliability benefit from this. Even low flow rates or media near their boiling point can therefore be conveyed without the introduction of heat.
● Closed Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
● Bearing
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-Dimensional stability. SSIC is extremely resistant to corrosion and abrasion

HETIM