All Categories

Products

Hoyga>Products>Mashiinka Dahaarka ah ee Fluor

https://www.neworld-cn.com/upload/product/1620456134950732.jpg
IMD magnetic centrifugal bamka

IMD magnetic centrifugal bamka


● IMD Magnetic Centrifugal Pump
● Magnetic drive Pump
Pump Bambooyin aan xirnayn

Email: [emailka waa la ilaaliyay]

Main Data Technical

● Flow rate: 1~160 m3/h; 4.4-704GPM
● Total delivery head: 17~62m; 17-203feet
● Heerkulka kala duwan: -20 °C ilaa 100 °C (-4°F ilaa 212 °F)

Codsiyada

● Corrosive, pure and contaminated media in chemical industries,
● Pharmaceutic and petrochemical industries,
● In metal processing, waste water treatment etc.  
● When Stainless steel is not sufficiently resistant
● An alternative for expensive haste alloy, titanium alloy pumps
● When anti-adhesive surfaces are important.
- Strong corrosive liquids
- Aggressive, explosive and toxic liquids
- Volatile chemicals
- Flammable liquids
- Difficult-to-seal liquids

Advantage tartanka

● Economic and Reliable Design Feature
-Naqshad aan sal lahayn iyo daadinta bilaashka ah
Iyada oo aan shaabad lahayn oo lagu dhex wado isku-xidhka magnetka, kaas oo ka fogaanaya daadinta.
-Qaabka is haysta
Naqshadaynta isku xidhan, isku xidhka birlabku waxay si toos ah ugu xidhmaysaa usha matoorka, iyada oo aan wax lumayn. Waxtarka sare iyo qaylada hoose. Iska yaree booska rakibaadda oo si fudud isu-ururinta.
-Dayactirka ku habboon
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,
-Ma jiro kuleyliyaha hadda jira ee magnetka
Gacmo bannaan oo ka samaysan caag Carbon-fiber-reinforced [CFRP], oo leh hanti farsamo oo aad u sareysa, oo ka madax bannaan ifafaalaha magnetic eddy hadda. Kormeerka iyo dayactirka shaqada.

Guriyeynta Pump

● Bikrad Fluoroplastic ah  
- Si aad ah u sahlan oo la isku halleyn karo oo tayo leh
- No reduction in the permeation resistance.
- Warbaahin kiimiko ah oo saafi ah iyo kuwa wanaagsan: ma jirto wasakhayn
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Gacan-fure oo ka samaysan caag la xoojiyay kaarboon-fiber [CFRP]
-Nidaamka bir la'aanta ah ma keenayo qulqulo qulqulaya oo sidaas awgeed ka fogaanaya kuleyl aan loo baahnayn. Hufnaanta iyo isku halaynta hawlgelinta ayaa tan ka faa'iideysanaya. Xataa heerarka socodka hooseeya ama warbaahinta u dhow barta ay karkarinayaan sidaas darteed waa la gudbin karaa iyada oo aan la gelin kulayl.
● Closed Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
● Qaadashada
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-Dimensional stability. SSIC is extremely resistant to corrosion and abrasion

WEYDIISASHADA