Vaega faapitoa uma

Products

Fale>Products>Fluor Palasitika Laina pamu

https://www.neworld-cn.com/upload/product/1620458111981141.jpg
ZMD Self-priming pump

ZMD Self-priming pump


● ZMD Self-priming Pump
● Plastic chemical pump
● Self-priming Pump

Email: [imeli puipuia]

Faʻamatalaga Faʻamatalaga Taua

● Flow: up to 400 m3/h, max 1761 GPM
● Head: 80 m; 410 feet
● Temperature: - 20 °C to +150 °C; -68 °F to +302 °F

talosaga

● Petrochemicals,
● Non-ferrous metal metallurgy,
● Pesticide,
● Acid and caustics,
● Pulp production,
● Acid pickling process,
● Rare- earth separation,
● Galvanization,
● Electronics etc

Pamu Suavai
● Acids & lyes    
● Waste water
● Chlorine water
● Electrolyte
● Chlorine water and waste water treatment
● Petroleum Industry
● Chemical Industry
● Adding acid process.

Faʻamanuiaga Faʻamasino

O le Fale Pamu
● Virgin Fluoroplastic  
- E matua faigofie ma sili atu ona fa'atuatuaina le lelei o le pulea
- Leai se fa'aiti'itia o le fa'atosina
- Va'aiga mama ma vaila'au fa'apitonu'u lelei: leai se fa'aleagaina
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN, ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP]
-O le faiga e leai se u'amea e le fa'aosoina so'o se galu eddy ma fa'apea ona aloese mai le fa'atupuina o le vevela e le mana'omia. O le lelei ma le fa'atuatuaina o le fa'agaioiga e manuia mai ai. E o'o lava i le maualalo o tafega po'o ala fa'asalalau e latalata i lo latou mea fa'apuna e mafai ona fa'ailoa e aunoa ma le fa'aofiina o le vevela.
● Close Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media.
● Bearing
-The main characteristics of SIC are extreme hardness, high-temperature, anti-corrosion, small expansion coefficient, long service life.

fesili