Vaega faapitoa uma

Products

Fale>Products>Fluor Palasitika Laina pamu

https://www.neworld-cn.com/upload/product/1620456134950732.jpg
IMD maneta centrifugal pamu

IMD maneta centrifugal pamu


● IMD Magnetic Centrifugal Pump
● Magnetic drive Pump
● pamu fa'amaufa'ailoga

Email: [imeli puipuia]

Faʻamatalaga Faʻamatalaga Taua

● Flow rate: 1~160 m3/h; 4.4-704GPM
● Total delivery head: 17~62m; 17-203feet
● Va'aiga vevela: -20 °C i le 100 °C (-4°F i le 212 °F)

talosaga

● Corrosive, pure and contaminated media in chemical industries,
● Pharmaceutic and petrochemical industries,
● In metal processing, waste water treatment etc.  
● When Stainless steel is not sufficiently resistant
● An alternative for expensive haste alloy, titanium alloy pumps
● When anti-adhesive surfaces are important.
- Strong corrosive liquids
- Aggressive, explosive and toxic liquids
- Volatile chemicals
- Flammable liquids
- Difficult-to-seal liquids

Faʻamanuiaga Faʻamasino

● Economic and Reliable Design Feature
-Sealess design and free leakage
Without shaft seal and driving through by magnetic coupling, which avoid leakage.
-Compact structure
Close-coupled design, magnetic coupling connect to motor shaft end directly, without rolling bearing loss. High efficiency and low noise. Reduce installation space and easily assembly.
-Convenient maintenance
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,
-No magnetic eddy current heating
Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP],With high-strength mechanical property, free from the magnetic eddy current phenomenon.Inspection and maintenance work.

O le Fale Pamu

● Virgin Fluoroplastic  
- E matua faigofie ma sili atu ona fa'atuatuaina le lelei o le pulea
- No reduction in the permeation resistance.
- Va'aiga mama ma vaila'au fa'apitonu'u lelei: leai se fa'aleagaina
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● La'au fa'alava e faia i le palasitika ua fa'amalosia e le carbon-fiber [CFRP]
-O le faiga e leai se u'amea e le fa'aosoina so'o se galu eddy ma fa'apea ona aloese mai le fa'atupuina o le vevela e le mana'omia. O le lelei ma le fa'atuatuaina o le fa'agaioiga e manuia mai ai. E o'o lava i le maualalo o tafega po'o ala fa'asalalau e latalata i lo latou mea fa'apuna e mafai ona fa'ailoa e aunoa ma le fa'aofiina o le vevela.
● Closed Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
● tauaveina
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-Dimensional stability. SSIC is extremely resistant to corrosion and abrasion

fesili