Vaega faapitoa uma


Fale>Products>Fluor Palasitika Laina pamu
IHF centrifugal pamu kemisi

IHF centrifugal pamu kemisi

● IHF centrifugal chemical pump
● pamu vailaʻau palasitika

Email: [imeli puipuia]

Faʻamatalaga Faʻamatalaga Taua

● Fa'asolo: e o'o i le 400 m3/h, maualuga 1761 GPM
● Ulu: 80 m; 410 futu
● Vevela: - 20 °C i le +150 °C; -68 °F i le +302 °F


● Acid, alkali,
● Salt solution,
● Strong oxidant,
● Organic solvents,
● Corrosive slurries, solvents,
● Hydrocarbons and other strong corrosive medium,
● Ammonia water ion film caustic soda,
● Vai otaota
● Acid pickling process
● Painting process  
● Textile industry
● Pharmacy and Health
● Electroplating industry
● Suavai chlorine ma vai lafoai
● Alamanuia Suauʻu
● Alamanuia Kemisi
● Adding acid process

Faʻamanuiaga Faʻamasino

Lining process is the Patent technical
● The material is virgin, unfilled lining FEP,therefore it has the following features:
(1) Considerably easier and more reliable quality control.
(2) No reduction in the permeation resistance.
(3) Pure pharmaceutical and fine chemical media: no contamination
● Robust pump casing
Pump casing and cover are made of HT200 iron lined with PFA, PTFE, and the impeller is made by WCB and wrapped by PTFA, PTFE, which enables that this type of centrifugal pump could be widely used in corrosive application and wear well. With ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump 1979. In contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered (pump housing picture)
● Reliable mechanical seal
Shaft seal is outside seal, stationary seal is alumina ceramic ( 99.9%), rotating seal is PTFE filling material or according to customer request.