Kategoriji kollha

prodotti

Id-dar>prodotti>Pompa miksija bil-plastik Fluor

https://www.neworld-cn.com/upload/product/1620458111981141.jpg
Pompa ZMD li taħdem għal rasha

Pompa ZMD li taħdem għal rasha


● ZMD Self-priming Pump
● Plastic chemical pump
● Self-priming Pump

Email: [protett bl-email]

Main Dejta Teknika

● Flow: up to 400 m3/h, max 1761 GPM
● Head: 80 m; 410 feet
● Temperature: - 20 °C to +150 °C; -68 °F to +302 °F

applikazzjonijiet

● Petrochemicals,
● Metallurġija tal-metall mhux tal-ħadid,
● Pesticide,
● Acid and caustics,
● Pulp production,
● Acid pickling process,
● Rare- earth separation,
● Galvanization,
● Electronics etc

Pumping Liquid
● Aċidi u lisi    
● Ilma mormi
● Chlorine water
● Electrolyte
● Chlorine water and waste water treatment
● Petroleum Industry
● Chemical Industry
● Adding acid process.

Vantaġġ Kompetittiv

Id-Djar tal-Pompa
● Fluoroplastiku Verġni  
- Kontroll tal-kwalità konsiderevolment aktar faċli u affidabbli
- No reduction in the permeation resistance
- Medja farmaċewtika pura u kimika fina: l-ebda kontaminazzjoni
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN, ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Spacer sleeve magħmul minn plastik rinfurzat bil-fibra tal-karbonju [CFRP]
-Is-sistema mingħajr metall ma tinduċi l-ebda kurrent eddy u b'hekk tevita l-ġenerazzjoni ta 'sħana bla bżonn. L-effiċjenza u l-affidabbiltà operattiva jibbenefikaw minn dan. Anke rati baxxi ta 'fluss jew midja qrib il-punt tat-togħlija tagħhom jistgħu għalhekk jitwasslu mingħajr l-introduzzjoni tas-sħana.
● Close Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media.
● Filwaqt
-The main characteristics of SIC are extreme hardness, high-temperature, anti-corrosion, small expansion coefficient, long service life.

INKJESTA