Kategoriji kollha

prodotti

Id-dar>prodotti>Pompa miksija bil-plastik Fluor

https://www.neworld-cn.com/upload/product/1620455370720680.jpg
Pompa kimika ċentrifugali IHF

Pompa kimika ċentrifugali IHF


● IHF centrifugal chemical pump
● Pompa kimika tal-plastik

Email: [protett bl-email]

Main Dejta Teknika

● Fluss: sa 400 m3 / h, massimu 1761 GPM
● Ras: 80 m; 410 pied
● Temperatura: - 20 ° C sa +150 ° C; -68 ° F sa +302 ° F

applikazzjonijiet

● Acid, alkali,
● Salt solution,
● Strong oxidant,
● Organic solvents,
● Corrosive slurries, solvents,
● Hydrocarbons and other strong corrosive medium,
● Ammonia water ion film caustic soda,
● Ilma mormi
● Acid pickling process
● Painting process  
● Textile industry
● Pharmacy and Health
● Electroplating industry
● Trattament ta 'ilma tal-kloru u ilma mormi
● Industrija tal-Petroleum
● Industrija Kimika
● Adding acid process

Vantaġġ Kompetittiv

Lining process is the Patent technical
● The material is virgin, unfilled lining FEP,therefore it has the following features:
(1) Kontroll tal-kwalità konsiderevolment eħfef u aktar affidabbli.
(2) L-ebda tnaqqis fir-reżistenza tal-permeazzjoni.
(3) Mezzi farmaċewtiċi puri u kimiċi fini: l-ebda kontaminazzjoni
● Robust pump casing
Pump casing and cover are made of HT200 iron lined with PFA, PTFE, and the impeller is made by WCB and wrapped by PTFA, PTFE, which enables that this type of centrifugal pump could be widely used in corrosive application and wear well. With ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump 1979. In contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered (pump housing picture)
● Reliable mechanical seal
Shaft seal is outside seal, stationary seal is alumina ceramic ( 99.9%), rotating seal is PTFE filling material or according to customer request.

INKJESTA