Ngā Kāwai katoa


Kaainga>Products>Fluor Kirihou Raina Maama
IMD papu papu haukehu

IMD papu papu haukehu

● IMD Magnetic Centrifugal Pump
● Magnetic drive Pump
● papu papu kore

īmēra: [email tiakina]

Main Raraunga Hangarau

● Flow rate: 1~160 m3/h; 4.4-704GPM
● Total delivery head: 17~62m; 17-203feet
● Te awhe wera: -20 ° C ki te 100 ° C (-4 ° F ki te 212 ° F)


● Corrosive, pure and contaminated media in chemical industries,
● Pharmaceutic and petrochemical industries,
● In metal processing, waste water treatment etc.  
● When Stainless steel is not sufficiently resistant
● An alternative for expensive haste alloy, titanium alloy pumps
● When anti-adhesive surfaces are important.
- Strong corrosive liquids
- Aggressive, explosive and toxic liquids
- Volatile chemicals
- Flammable liquids
- Difficult-to-seal liquids

Painga whakataetae

● Economic and Reliable Design Feature
-Sealess design and free leakage
Without shaft seal and driving through by magnetic coupling, which avoid leakage.
-Compact structure
Close-coupled design, magnetic coupling connect to motor shaft end directly, without rolling bearing loss. High efficiency and low noise. Reduce installation space and easily assembly.
-Convenient maintenance
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,
-No magnetic eddy current heating
Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP],With high-strength mechanical property, free from the magnetic eddy current phenomenon.Inspection and maintenance work.

Te Whare Papu

● Wahine Fluoroplastic  
- He maama me te pono o te kounga whakahaere
- No reduction in the permeation resistance.
- Te rongoa rongoa ma me te rongoa rongoa pai: kaore he poke
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Te ringaringa o te Spacer i hangaia ki te kirihou Carbon-fiber-whakapakari [CFRP]
-Kore te punaha kore-maitai e akiaki i nga ngaru eddy ka karo i te whakaputa wera kaore e hiahiatia. Ko te whaihua me te pono o te whakahaere e whai hua ai. Ahakoa nga reeti iti, papahoho ranei e tata ana ki te kohua o raatau ka taea te kawe me te kore e whakaputaina te wera.
● Closed Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
● Te whanau
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-Dimensional stability. SSIC is extremely resistant to corrosion and abrasion