Ngā Kāwai katoa

Products

Kaainga>Products>Fluor Kirihou Raina Maama

https://www.neworld-cn.com/upload/product/1620455370720680.jpg
IHF papu papu ahuru

IHF papu papu ahuru


● IHF centrifugal chemical pump
● Te papu matū kirihou

īmēra: [email tiakina]

Main Raraunga Hangarau

● Rere: tae atu ki te 400 m3 / h, max 1761 GPM
● Upoko: 80 m; 410 waewae
● Temperature: - 20 ° C ki te +150 ° C; -68 ° F ki te +302 ° F.

tono

● Acid, alkali,
● Salt solution,
● Strong oxidant,
● Organic solvents,
● Corrosive slurries, solvents,
● Hydrocarbons and other strong corrosive medium,
● Ammonia water ion film caustic soda,
● Wai moumou
● Acid pickling process
● Painting process  
● Textile industry
● Pharmacy and Health
● Electroplating industry
● Te waipiro haumanu me te maimoatanga wai maumau
● Ahumahi Ahumoana
● Ahumahi Matū
● Adding acid process

Painga whakataetae

Lining process is the Patent technical
● The material is virgin, unfilled lining FEP,therefore it has the following features:
(1) He maamaa te whakahaere me te kounga o te kounga pono.
(2) Kaore he whakaiti i te aukati aukati.
(3) Te rongoa rongoa maama me te rongoa rongoa pai: kaore he poke
● Robust pump casing
Pump casing and cover are made of HT200 iron lined with PFA, PTFE, and the impeller is made by WCB and wrapped by PTFA, PTFE, which enables that this type of centrifugal pump could be widely used in corrosive application and wear well. With ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump 1979. In contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered (pump housing picture)
● Reliable mechanical seal
Shaft seal is outside seal, stationary seal is alumina ceramic ( 99.9%), rotating seal is PTFE filling material or according to customer request.

ENQUIRY