Ngā Kāwai katoa


Kaainga>Products>API 610
SM series axial ritua te papu ngote rua

SM series axial ritua te papu ngote rua

● Axial split double suction pump
● I waenga i te momo papu papu
● BB1
● API 610 BB1 papu

īmēra: [email tiakina]

Main Raraunga Hangarau

● Capacity: 10,000m3/h
● Upoko: 180m
● Temperature: -20-160 ° C


● This series of pumps are widely used in water irrigation, water treatment, petrochemical, power stations, thermal power plants, pipe network pressurization, crude oil (product oil) transportation, seawater desalination and other occasions.

● Pumps can be used in the typical working conditions that include lean liquid pump, the rich liquid pump and the hydraulic turbine in the large-scale ammonia plant, and the pipeline main pump in the crude oil or product oil transportation project.

Painga whakataetae

● The casing and bearing are designed by axial splitting. The pump inlet and outlet pipes are located in the lower part of the pump body. The pump can be repaired and maintained without disassembling the inlet and outlet pipes.

● Forced lubrication sliding bearings, self-lubricating sliding bearings or rolling bearings can be configured depending on the energy density (P.n).

● The installation of pump is more convenient and the operation is more reliable because of stepped impeller axial positioning structure and reliable impeller locking mode.

● There is a positioning pin between the bearing housing and the pump body. It is not necessary to adjust the pump volume during the secondary installation of the pump, which greatly shortens the pump maintenance and maintenance cycle.