IMD miðflótta seguldæla

● Flow rate: 1~160 m3/h; 4.4-704GPM
● Total delivery head: 17~62m; 17-203feet
● Hitastig: -20 °C til 100 °C (-4 °F til 212 °F)

● Corrosive, pure and contaminated media in chemical industries,
● Pharmaceutic and petrochemical industries,
● In metal processing, waste water treatment etc.  
● When Stainless steel is not sufficiently resistant
● An alternative for expensive haste alloy, titanium alloy pumps
● When anti-adhesive surfaces are important.
- Strong corrosive liquids
- Aggressive, explosive and toxic liquids
- Volatile chemicals
- Flammable liquids
- Difficult-to-seal liquids

● Economic and Reliable Design Feature
-Segulaus hönnun og ókeypis leki
Án bolþéttingar og ekið í gegnum með segulkúplingu, sem forðast leka.
-Samþykkt uppbygging
Nátengd hönnun, segulmótun tengist beint við endann á mótorásinni, án þess að veltingur berist. Mikil afköst og lágmark hávaði. Draga úr uppsetningarplássi og samsetningu auðveldlega.
-Þægilegt viðhald
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,
-Ekkert segulmagnaðir hvirfilstraumur
Spacer ermi úr koltrefjastyrktu plasti [CFRP], Með vélrænni eiginleika með miklum styrk, laus við segulsviðsfyrirbrigðið. Skoðun og viðhaldsvinna.

Dæluhúsið

● Virgin Fluoroplastic  
- Töluvert auðveldara og áreiðanlegra gæðaeftirlit
- No reduction in the permeation resistance.
- Hreint lyfjafræðilegt og fínt efni: engin mengun
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Rúmhylki úr koltrefjastyrktu plasti [CFRP]
-Málmlausa kerfið framkallar enga hvirfilstrauma og forðast þannig óþarfa hitamyndun. Hagkvæmni og rekstraráreiðanleiki hagnast á þessu. Jafnvel lágt rennsli eða miðill nálægt suðumarki er því hægt að flytja án þess að hiti komi inn.
● Closed Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
● Bearing
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-Dimensional stability. SSIC is extremely resistant to corrosion and abrasion