Allir flokkar

Vörur

Heim>Vörur>Flúor plastfóðruð dæla

https://www.neworld-cn.com/upload/product/1620455370720680.jpg
IHF miðflótta efnadæla

IHF miðflótta efnadæla


● IHF centrifugal chemical pump
● Efnadæla úr plasti

Tölvupóstur: [netvarið]

Helstu tækniforskriftir

● Rennsli: allt að 400 m3/klst., hámark 1761 GPM
● Höfuð: 80 m; 410 fet
● Hitastig: - 20 °C til +150 °C; -68 °F til +302 °F

Umsóknir

● Acid, alkali,
● Salt solution,
● Strong oxidant,
● Organic solvents,
● Corrosive slurries, solvents,
● Hydrocarbons and other strong corrosive medium,
● Ammonia water ion film caustic soda,
● Affallsvatn
● Acid pickling process
● Painting process  
● Textile industry
● Pharmacy and Health
● Electroplating industry
● Meðhöndlun klórvatns og skólps
● Olíuiðnaður
● Efnaiðnaður
● Adding acid process

Samkeppnisforskot

Lining process is the Patent technical
● The material is virgin, unfilled lining FEP,therefore it has the following features:
(1) Töluvert auðveldara og áreiðanlegra gæðaeftirlit.
(2) Engin lækkun á gegndræpi viðnám.
(3) Hreint lyfjafræðilegt og fínt efni: engin mengun
● Robust pump casing
Pump casing and cover are made of HT200 iron lined with PFA, PTFE, and the impeller is made by WCB and wrapped by PTFA, PTFE, which enables that this type of centrifugal pump could be widely used in corrosive application and wear well. With ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump 1979. In contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered (pump housing picture)
● Reliable mechanical seal
Skaftþétting er ytri innsigli, kyrrstæð innsigli er súrál keramik (99.9%), snúningsþétting er PTFE fyllingarefni eða samkvæmt beiðni viðskiptavina.

Fyrirspurn