Allir flokkar


Heim>Vörur>Efnafræðileg dæla
ICP röð efnadæla

ICP röð efnadæla

● ICP  series chemical pump
● Enda sogdæla
● ISO2858
● Stainless steel pump

Tölvupóstur: [netvarið]

Helstu tækniforskriftir

● Stærð: 2-480 m3/klst
● Höfuð: 3-150m
● Hitastig: -80°C ~300 °C
● Þrýstingur: 2.5Mpa
● Efni: Steypt stál, SS304, SS316, SS316Ti, SS316L, CD4MCu, títan, títan álfelgur, Hastelloy álfelgur


● A certain amount of solid particles are mainly used in the chemical industry, petrochemical industry, oil refining, metallurgy, light industry, medicine and other industrial sectors.


Improve the life of mechanical seals and bearings that have the highest failure rate in the operation of chemical pumps.
● Use thicker shaft to increase shaft rigidity
● The bearing is enlarged and adopts double-row radial thrust ball bearing, the roller axial clearance is small, the bearing life is more than 25,000 hours, and the life of the mechanical seal is prolonged.
● The impeller and the pump shaft are connected by threads, with reliable sealing, convenient disassembly and assembly, and better cavitation resistance than IH pumps.
● The bearing box has a spacious cavity, the mechanical seal has good working conditions and has a long life.
● Water-cooled or air-cooled bearing box, or water-cooled shaft seal box is available, and the pump body is supported in the center.
● Cartridge mechanical seals can be supplied in accordance with the eighth edition of the American API610 standard, Article
● Various types of shaft seals are available: single end face, double end face, tandem, internal and external mechanical seal; auxiliary impeller, packing seal, and auxiliary system of mechanical seal can be supplied according to the American AP1610 standard.
● Can be equipped with pressure sensor or motor protection switch to prevent overload damage to the motor and liquid break damage to the mechanical seal.
● It can be equipped with a motor speed regulating device to adjust the flow at any time, and can be linked and automatically controlled with the level gauge. It can also be interlocked with the flow meter to automatically control the required flow rate.