tout Kategori

pwodwi yo

Kay>pwodwi yo>Ponp Plastik Fliyò

https://www.neworld-cn.com/upload/product/1620456134950732.jpg
IMD mayetik santrifujeur ponp

IMD mayetik santrifujeur ponp


● IMD Magnetic Centrifugal Pump
● Magnetic drive Pump
● Sealless ponp

Imèl: [imèl pwoteje]

Main Done teknik

● Flow rate: 1~160 m3/h; 4.4-704GPM
● Total delivery head: 17~62m; 17-203feet
● Tanperati ranje: -20 ° C a 100 ° C (-4 ° F a 212 ° F)

Aplikasyon

● Corrosive, pure and contaminated media in chemical industries,
● Pharmaceutic and petrochemical industries,
● In metal processing, waste water treatment etc.  
● When Stainless steel is not sufficiently resistant
● An alternative for expensive haste alloy, titanium alloy pumps
● When anti-adhesive surfaces are important.
- Strong corrosive liquids
- Aggressive, explosive and toxic liquids
- Volatile chemicals
- Flammable liquids
- Difficult-to-seal liquids

konpetitif Advantage

● Economic and Reliable Design Feature
-Sealess design and free leakage
Without shaft seal and driving through by magnetic coupling, which avoid leakage.
-Estrikti kontra enfòmèl ant
Close-coupled design, magnetic coupling connect to motor shaft end directly, without rolling bearing loss. High efficiency and low noise. Reduce installation space and easily assembly.
-Convenient maintenance
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,
-No magnetic eddy current heating
Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP],With high-strength mechanical property, free from the magnetic eddy current phenomenon.Inspection and maintenance work.

Ponp Lojman an

● Vyèj Fluoroplastic  
- Konsidere pi fasil ak plis serye kontwòl kalite
- No reduction in the permeation resistance.
- Pi famasetik ak medya chimik amann: pa gen okenn kontaminasyon
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Manch spacer fèt an plastik Kabòn-fibre ranfòse [CFRP]
-Sistèm nan metal-gratis pa pwovoke nenpòt ki kouran eddy e konsa evite jenerasyon chalè nesesè. Efikasite ak fyab operasyonèl benefisye de sa. Menm pousantaj koule ki ba oswa medya tou pre pwen bouyi yo ka Se poutèt sa transmèt san entwodiksyon chalè.
● Closed Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
● Portant
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-Dimensional stability. SSIC is extremely resistant to corrosion and abrasion

INQUIRY