tout Kategori

pwodwi yo

Kay>pwodwi yo>Ponp Plastik Fliyò
IHF ponp chimik santrifujeur

IHF ponp chimik santrifujeur

● IHF centrifugal chemical pump
● Ponp chimik plastik

Imèl: [imèl pwoteje]

Main Done teknik

● Flow: jiska 400 m3 / h, max 1761 GPM
● Tèt: 80 m; 410 pye
● Tanperati: - 20 ° C a +150 ° C; -68 ° F rive +302 ° F.


● Acid, alkali,
● Salt solution,
● Strong oxidant,
● Organic solvents,
● Corrosive slurries, solvents,
● Hydrocarbons and other strong corrosive medium,
● Ammonia water ion film caustic soda,
● Waste dlo
● Acid pickling process
● Painting process  
● Textile industry
● Pharmacy and Health
● Electroplating industry
● Klò dlo ak tretman dlo dechè
● endistri petwòl
● Endistri chimik
● Adding acid process

konpetitif Advantage

Lining process is the Patent technical
● The material is virgin, unfilled lining FEP,therefore it has the following features:
(1) Kontwòl kalite pi fasil e pi serye.
(2) Pa gen okenn rediksyon nan rezistans pénétration a.
(3) Pi medya famasetik ak chimik amann: pa gen okenn kontaminasyon
● Robust pump casing
Pump casing and cover are made of HT200 iron lined with PFA, PTFE, and the impeller is made by WCB and wrapped by PTFA, PTFE, which enables that this type of centrifugal pump could be widely used in corrosive application and wear well. With ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump 1979. In contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered (pump housing picture)
● Reliable mechanical seal
Shaft seal is outside seal, stationary seal is alumina ceramic ( 99.9%), rotating seal is PTFE filling material or according to customer request.