tout Kategori

pwodwi yo

Kay>pwodwi yo>Ponp Plastik Fliyò

https://www.neworld-cn.com/upload/product/1620454343260221.jpg
GF Inline Ponp

GF Inline Ponp


● GF Inline Pump
● Plastic Inline Pump

Imèl: [imèl pwoteje]

Main Done teknik

● Flow rate: 8-120 m3/h;
● Total delivery head: 82m;
● Temperature range: -20℃—150℃

Aplikasyon

● Pumping
● Acid and caustic liquid
● Oxidizer corrosive liquids
● Salt solution
● Petrochemical
● Chimik
● Power station
● Pulp paper  
● Nonferrous smelting process
● Food industry
● Flue gas desulfurization
● Dust removal  
● Synthetic fiber

konpetitif Advantage

● Long life mechanical seal.  Sele arbr se deyò sele mekanik, ki materyèl bag estasyonè se seramik alumina, wotasyon bag te fè nan PTFE, sele mekanik kapab pote likid segondè korozivite.  
Pratik antretyen, estrikti ki senp, fasil pou reparasyon. Lè chanje impeller, mekanik sele pyès rezèv, pa bezwen demonte tiyo a.
Materyèl la se jenn fi, vid pawa FEP / PTFE
(1) Kontwòl kalite pi fasil e pi serye.
(2) Pa gen okenn rediksyon nan rezistans pénétration a.
(3) Pi medya famasetik ak chimik amann: pa gen okenn kontaminasyon
Robust pump casing.  With ductile cast iron armouring absorbs all the hydraulic and pipe work forces to DIN/ISO5199/Europump 1979.In contrast to partially or non-armored plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered(pump housing picture)
Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Impeller connecting with Motor directly, which can balance radial and axial load.

INQUIRY
Ki gen rapò pwodwi