Kategoria guztiak

Produktuak

Hasiera>Produktuak>Fluor plastikozko forratutako ponpa

https://www.neworld-cn.com/upload/product/1620456134950732.jpg
IMD ponpa zentrifugo magnetikoa

IMD ponpa zentrifugo magnetikoa


● IMD Magnetic Centrifugal Pump
● Magnetic drive Pump
● Zigilurik gabeko ponpa

E-mail: [posta elektroniko bidez babestua]

Main Datu teknikoak

● Flow rate: 1~160 m3/h; 4.4-704GPM
● Total delivery head: 17~62m; 17-203feet
● Tenperatura tartea: -20 ° C eta 100 ° C (-4 ° F eta 212 ° F)

aplikazioak

● Corrosive, pure and contaminated media in chemical industries,
● Pharmaceutic and petrochemical industries,
● In metal processing, waste water treatment etc.  
● When Stainless steel is not sufficiently resistant
● An alternative for expensive haste alloy, titanium alloy pumps
● When anti-adhesive surfaces are important.
- Strong corrosive liquids
- Aggressive, explosive and toxic liquids
- Volatile chemicals
- Flammable liquids
- Difficult-to-seal liquids

Lehiatzeko abantaila

● Economic and Reliable Design Feature
-Bakoitza diseinua eta ihesaldi librea
Ez da ardatz zigilatu gabe eta akoplamendu magnetikoaren bidez gidatzen, ihesak ekiditen dituztenak.
-Egitura trinkoa
Close-coupled design, magnetic coupling connect to motor shaft end directly, without rolling bearing loss. High efficiency and low noise. Reduce installation space and easily assembly.
-Convenient maintenance
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,
-No magnetic eddy current heating
Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP],With high-strength mechanical property, free from the magnetic eddy current phenomenon.Inspection and maintenance work.

Ponpa Etxebizitza

● Fluoroplastiko birjina  
- Kalitate kontrol nahiko errazagoa eta fidagarriagoa
- No reduction in the permeation resistance.
- Mediku farmazeutiko eta kimiko finak: kutsadurarik ez
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Karbono-zuntzez indartutako plastikozko plastikozko zorroa [CFRP]
-Metalik gabeko sistemak ez du inolako zurrunbilo korronterik eragiten eta, beraz, alferrikako beroa ekiditen du. Eraginkortasuna eta ustiapen fidagarritasuna onuragarria dira. Hortaz, irakite-puntutik gertu dauden emari-abiadura baxuak edo fluidoak ere beroa sartu gabe igor daitezke.
● Closed Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
● Errodamendua
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-Dimensional stability. SSIC is extremely resistant to corrosion and abrasion

INQUIRY