Kategoria guztiak


Hasiera>Produktuak>Fluor plastikozko forratutako ponpa

IHF ponpa kimiko zentrifugoa

IHF ponpa kimiko zentrifugoa

● IHF centrifugal chemical pump
● Plastikozko ponpa kimikoa

E-mail: [posta elektroniko bidez babestua]

Main Datu teknikoak

● Emaria: 400 m3 / h arte, gehienez 1761 GPM
● Burua: 80 m; 410 oin
● Tenperatura: - 20 ° C eta +150 ° C; -68 ° F eta +302 ° F


● Acid, alkali,
● Salt solution,
● Strong oxidant,
● Organic solvents,
● Corrosive slurries, solvents,
● Hydrocarbons and other strong corrosive medium,
● Ammonia water ion film caustic soda,
● Hondakin urak
● Acid pickling process
● Painting process  
● Textile industry
● Pharmacy and Health
● Electroplating industry
● Kloro ura eta hondakin uren tratamendua
● Petrolioaren industria
● Industria kimikoa
● Adding acid process

Lehiatzeko abantaila

Lining process is the Patent technical
● The material is virgin, unfilled lining FEP,therefore it has the following features:
(1) Kalitate-kontrol izugarri errazagoa eta fidagarriagoa.
(2) Iragazkortasun-erresistentzia murriztu gabe.
(3) Farmazeutiko puruak eta kimiko finak: ez dago kutsadurarik
● Robust pump casing
Pump casing and cover are made of HT200 iron lined with PFA, PTFE, and the impeller is made by WCB and wrapped by PTFA, PTFE, which enables that this type of centrifugal pump could be widely used in corrosive application and wear well. With ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump 1979. In contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered (pump housing picture)
● Reliable mechanical seal
Shaft seal is outside seal, stationary seal is alumina ceramic ( 99.9%), rotating seal is PTFE filling material or according to customer request.