Tots els pobles


Inici>Productes>Bomba folrada de plàstic fluor
Bomba de purins UHB-ZK

Bomba de purins UHB-ZK

● UHB-ZK Slurry Pump
● Slurry Pump

correu electrònic: [protegit per correu electrònic]

Dades tècniques principals

● Flow rate: 5~300 m3/h;
● Total delivery head: 17~50m;
● Temperature range: -20 °C to 100 °C (-4°F to 212 °F)


● Àcids i lleixes
● Solució salina
● Oils
● Beguda
● Beer & alcohol
● Dissolvent orgànic
● High corrosion medium
● High and low density slurry  
● Alkene  
● Aigües residuals

● Automobile pickling,
● Metal·lúrgia de metalls no fèrrics,
● Sosa càustica
● Pesticida
● Electrònica
● Fabricació de paper
● Separació de terres rares
● Farmacèutica
● Producció de pasta
● Indústria de l'àcid sulfúric
● Indústria de protecció del medi ambient

avantatge competitiu

● Corrosion resistance and Friction resistance
● Single stage and single suction centrifugal pump.  Wetted part manufactured from the most corrosion- resistant material UHMW-PE to handle your most aggressive chemicals. Pump casing is metal parts, which make pump bearing high pressure.
● Robust pump casing With ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump 1979.In contrast to partially or non-armoured plastic pumps, no expansion joints are required.Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered(pump housing picture)
● Wide application  UHB-ZK can transfer acid and caustic liquid and slurries, also able to handle kinds of corrosive slurries in metallurgy, mining and alkene in sulfuric acid industry and waste water in Environmental protection industry. The material is  virgin, unfilled linning UHMWPE,Therefore:(1)Considerably easier and more reliable quality control.(2)No reduction in the permeation resistance.(3)Pure pharmaceutical and fine chemical media: no contamination
● Multiple mechanical seal 
Choose from K type oil seal, single mechanical seal and dual mechanical seal to ensure a perfect assembly for your application. According to temperature and partical content, different type mechanical can been chosen
With connection joint( lined with polyolefin),the maintenance work can be done without remove the inlet/outlet piping