Alle kategorieë

produkte

home>produkte>Fluor-plastiek gevoerde pomp

https://www.neworld-cn.com/upload/product/1620458111981141.jpg
ZMD Selfaanzuigende pomp

ZMD Selfaanzuigende pomp


● ZMD Self-priming Pump
● Plastic chemical pump
● Self-priming Pump

e-pos: [e-pos beskerm]

Hoof Tegniese Data

● Flow: up to 400 m3/h, max 1761 GPM
● Head: 80 m; 410 feet
● Temperature: - 20 °C to +150 °C; -68 °F to +302 °F

aansoeke

● Petrochemicals,
● Nie-ysterhoudende metaal metallurgie,
● Pesticide,
● Acid and caustics,
● Pulp production,
● Acid pickling process,
● Rare- earth separation,
● Galvanization,
● Electronics etc

Pomp vloeistof
● Sure en loë    
● Afvalwater
● Chlorine water
● Electrolyte
● Chlorine water and waste water treatment
● Petroleum Industry
● Chemical Industry
● Adding acid process.

Mededingende voordeel

Die Pompbehuising
● Virgin Fluoroplastic  
- Aansienlik makliker en meer betroubare gehaltebeheer
- No reduction in the permeation resistance
- Suiwer farmaseutiese en fyn chemiese media: geen besoedeling nie
● With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN, ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
● Spasieerhuls gemaak van koolstofveselversterkte plastiek [CFRP]
-Die metaalvrye stelsel induseer geen werwelstrome nie en vermy dus onnodige hitte-opwekking. Doeltreffendheid en bedryfsbetroubaarheid baat hierby. Selfs lae vloeitempo's of media naby hul kookpunt kan dus oorgedra word sonder die inbring van hitte.
● Close Impeller
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media.
● Draer
-The main characteristics of SIC are extreme hardness, high-temperature, anti-corrosion, small expansion coefficient, long service life.

ONDERSOEK